Littelfuse LCP Fused Coordination PaneL - Manual (Page 2)

Pre-Engineered Solution Datasheet
Littelfuse.com © 2013 Littelfuse POWR-GARD ® Products
Rev: 011113
2 of 3
LCP Fused Coordination PaneL
Selective Coordination Panel
Inner Line
GND Bus
Neutral Detail
Neutral Detail
(6 AWG - 300 kcmil) Cu/Al
Incoming Main Lugs
Cutler Hammer
GHB (480 V) or BAB (208 V)
Circuit Breakers
(or Pullouts)
LPSC001ID POWR-Safe
Dead front Class CC 600 VAC
Fuseholder for use with Littelfuse
CCMR, KLKR or KLDR Class CC fuses
or POWR-Safe LPSJ holders for use
the Class J fuses. (Fuses not included)
LPSC001ID POWR-Safe
Dead front Class CC 600 VAC
Fuseholder for use with Littelfuse
CCMR, KLKR or KLDR Class CC fuses
or POWR-Safe LPSJ holders for use
the Class J fuses. (Fuses not included)
Front Trim
Type 1 (NEMA) Enclosure
Front View with Front Removed
Hinged Door with
Catch and Lock
Dimensions in mm [inches]
Dimensions in mm [inches]
GND Bus
Inner Line
(6 AWG - 300 kcmil) Cu/Al
Incoming Main Lugs
Cutler Hammer
GHB (480 V) or BAB (208 V)
Circuit Breakers
(or Pullouts)
Front Trim
Type 1 (NEMA) Enclosure
Front View with Front Removed Hinged Door with
Catch and Lock
[6.00]
152.4
[6.00]
152.4
[28.00]
711.2
[28.00]
711.2
[36.00]
914.4
[24.00]
609.6
[16.50]
419.1
[28.00]
711.2
[42.00]
1066.8
[30.00]
762
[16.50]
419.1
[9.69]
246.06
[8.94]
227.01
[28.00]
711.2
[9.69]
246.06
[8.94]
227.01
Dimensions mm (inches)
Standard Coordination Panel Board (up to 30 circuits)
Standard Coordination Panel Board (31-42 circuits)
Inner Line
GND Bus
Neutral Detail
Neutral Detail
(6 AWG - 300 kcmil) Cu/Al
Incoming Main Lugs
Cutler Hammer
GHB (480 V) or BAB (208 V)
Circuit Breakers
(or Pullouts)
LPSC001ID POWR-Safe
Dead front Class CC 600 VAC
Fuseholder for use with Littelfuse
CCMR, KLKR or KLDR Class CC fuses
or POWR-Safe LPSJ holders for use
the Class J fuses. (Fuses not included)
LPSC001ID POWR-Safe
Dead front Class CC 600 VAC
Fuseholder for use with Littelfuse
CCMR, KLKR or KLDR Class CC fuses
or POWR-Safe LPSJ holders for use
the Class J fuses. (Fuses not included)
Front Trim
Type 1 (NEMA) Enclosure
Front View with Front Removed
Hinged Door with
Catch and Lock
Dimensions in mm [inches]
Dimensions in mm [inches]
GND Bus
Inner Line
(6 AWG - 300 kcmil) Cu/Al
Incoming Main Lugs
Cutler Hammer
GHB (480 V) or BAB (208 V)
Circuit Breakers
(or Pullouts)
Front Trim
Type 1 (NEMA) Enclosure
Front View with Front Removed Hinged Door with
Catch and Lock
[6.00]
152.4
[6.00]
152.4
[28.00]
711.2
[28.00]
711.2
[36.00]
914.4
[24.00]
609.6
[16.50]
419.1
[28.00]
711.2
[42.00]
1066.8
[30.00]
762
[16.50]
419.1
[9.69]
246.06
[8.94]
227.01
[28.00]
711.2
[9.69]
246.06
[8.94]
227.01
Note: The Littelfuse LPS, LPMP and LCP products are custom
designed products that fall outside standard specifications.
Dimensions may change depending on panel components.
More specialized configurations are also available.
Contact factory for more information.