Littelfuse SP723 Lead-Free_Green Series - Manual (Page 6)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/24/13
TVS Diode Arrays
(SPA ® Diodes)
General Purpose ESD Protection - SP723 Series
Part Numbering System
Lead Plating Matte Tin
Lead Material Copper Alloy
Lead Coplanarity 0.004 inches (0.102mm)
Substitute Material Silicon
Body Material Molded Epoxy
Flammability UL 94 V-0
Product Characteristics
Ordering Information
Package Dimensions — Small Outline Plastic Packages (SOIC)
Notes:
1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of
Publication Number 95.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold
flash, protrusion and gate burrs shall not exceed 0.15mm (0.006 inch) per side.
4. Dimension “E” does not include interlead flash or protrusions. Inter-lead flash
and protrusions shall not exceed 0.25mm (0.010 inch) per side.
5. The chamfer on the body is optional. If it is not present, a visual index feature
must be located within the crosshatched area.
6. “L” is the length of terminal for soldering to a substrate.
7. “N” is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. The eadl width “B”, as measured 0.36mm (0.014 inch) or greater above the
seating plane, shall not exceed a maximum value of 0.61mm (0.024 inch).
10. Controlling dimension:MILLIMETER. Converted inch dimensions are not
necessarily exact.
Package SOIC
Pins 8
JEDEC MS-012
Millimeters Inches
Notes
Min Max Min Max
A 1.35 1.75 0.0532 0.0688 -
A1 0.10 0.25 0.0040 0.0098 -
B 0.33 0.51 0.013 0.020 9
C 0.19 0.25 0.0075 0.0098 -
D 4.80 5.00 0.1890 0.1968 3
E 3.80 4.00 0.1497 0.1574 4
e 1.27 BSC 0.050 BSC -
H 5.80 6.20 0.2284 0.2440 -
h 0.25 0.50 0.0099 0.0196 5
L 0.40 1.27 0.016 0.050 6
N 8 8 7
µ 0º 8º 0º 8º -
INDEX
AREA
E
D
N
1 2 3
-B-
0.25(0.010) C A M B S
e
-A-
L
B
M
-C-
A1
A
SEATING PLANE
0.10(0.004)
h x 45 o
C
H 0.25(0.010) B M M
μ
NOTES:
1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of
Publication Number 95.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension “D” does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006
inch) per side.
4. Dimension “E” does not include interlead flash or protrusions. Inter-
lead flash and protrusions shall not exceed 0.25mm (0.010 inch) per
side.
5. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
6. “L” is the length of terminal for soldering to a substrate.
7. “N” is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. The lead width “B”, as measured 0.36mm (0.014 inch) or greater
above the seating plane, shall not exceed a maximum value of
0.61mm (0.024 inch).
10. Controlling dimension:MILLIMETER. Converted inch dimensions
are not necessarily exact.
Part Number Temp. Range (ºC) Package
Environmental
Informaton
Marking Min. Order
SP723APP -40 to 105 8 Ld PDIP Lead-free SP723AP(P) 1 2000
SP723ABG -40 to 105 8 Ld SOIC Green SP723A(B)G 2 1960
SP723ABTG -40 to 105 8 Ld SOIC Tape and Reel Green SP723A(B)G 2 2500
SP 723
Series
Package
P=Lead Free
T= Tape and Reel
AB = 8 Ld SOIC
AP = 8 Ld PDIP
G=Green
TVS Diode Arrays
(SPA ® Diodes)
** * *
Notes:
1. SP723AP(P) means device marking either SP723AP or SP723APP.
2. SP723A(B)G means device marking either SP723AG or SP723ABG which are good for types SP723ABG and SP723ABTG.