Littelfuse 160 Series - Manual (Page 3)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Surface Mount Fuses
NANO 2® > 160 Fuse and Clip Series
Materials
Body: Ceramic
Cap: Silver-plated Brass
Product Marking
Brand, Ampere Rating, Voltage Rating,
UMF Logo
Insulation Resistance
(after Opening)
MIL-STD-202, Method 302,
Test Condition A (10,000 ohms,
Minimum)
Solderability MIL-STD-202, Method 208
Resistance to
Soldering Heat MIL-STD-202, Method 210,
Test Condition B (10 seconds at 260°C)
Moisture Sensitivity
Level
Level 1 J-STD-020C
Product Characteristics
Dimensions
Packaging
Part Numbering System
Form Factor packaging Option packaging Specification Quantity
Quantity &
packaging Code
Surface Mount 24mm Tape and Reel EIA-RS 481-2 (IEC 286, part 3) 1000 MR
Operating Temperature –55°C to 125°C with proper rerating
Thermal Shock
MIL-STD-202F, Method 107G,
Test Condition B (5 cycles, -65°C
to 125°C)
Vibration
MIL-STD-202F, Method 201A
(10-55 Hz)
Moisture Resistance
MIL-STD-202, Method 106,
High Humidity (90-98%RH), Heat
(65°C)
Salt Spray
MIL-STD-202F, Method 101D,
Test Condition B
Mechanical Shock
MIL-STD-202, Method 213,
Test Condition I (100 G’s peak for
6 msecs.)
160 01.5 M R
SERIES
AMP Code
qUANTITY Code
PACKAGING Code
Refer to Electrical
Specifications table
M = 1000 pcs
R = Tape and Reel
Example:
1.5 amp product is
016001.5 MR
10.90 [0.429]
1.70
[0.067]
10.10 [0.398]
3.00
[0.118]
4.90 [0.193]
4.80 [0.189
]
4.80 [0.189
]
4.00 [0.157
]
3.50 [0.138
]
3.12 [0.123
]
4.40
[0.173]
4.30
[0.169] 13.00
[0.512]
3.88
[0.153]
3.12
[0.123]
4.80
[0.189]
Recommended Pad Layout
“A” “B”
.004
L
1.5AT
AC250V
F