Littelfuse SP0504S Series User Manual
Tvs diode arrays, Low capacitance esd protection - sp0504s series, Diodes)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/25/13
TVS Diode Arrays
(SPA
®
Diodes)
Low Capacitance ESD Protection - SP0504S Series
Description
Applications
The SP0504S has ultra low capacitance rail-to-rail diodes
with an additional zener diode fabricated in a proprietary
silicon avalanche technology to protect each I/O pin
providing a high level of protection for electronic equipment
that may experience destructive electrostatic discharges
(ESD). These robust diodes can safely absorb repetitive
ESD strikes at the maximum level (Level 4) specified in the
IEC 61000-4-2 international standard without performance
degradation. Their very low loading capacitance also makes
them ideal for protecting high speed signal pins such as
HDMI, DVI, USB2.0, and IEEE 1394.
Features
• Low capacitance of
0.85 pF (TYP) per I/O
• ESD protection of
±12kV contact discharge,
±15kV air discharge,
(IEC61000-4-2)
• EFT protection,
IEC61000-4-4, 40A
(5/50ns)
• Low leakage current of
0.5μA (MAX) at 5V
• Small packaging options
saves board space
• Lightning Protection,
IEC61000-4-5, 4.5A
(8/20µs)
• Computer Peripherals
• Mobile Phones
• PDA’s
• Digital Cameras
• Network Hardware/Ports
• Test Equipment
• Medical Equipment
Functional Block Diagram
I/O2
I/O1
GND
I/O3
V
CC
I/O4
Pinout
I/O 1
I/O 2
SOT23-6
V
CC
I/O 3
I/O 4
GND
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
RoHS
Pb
GREEN
Application Example
RJ-45
Connector
Ethernet PHY
J1
J8
GND
NC
Tx-
Rx+
Rx-
Tx+
SP0504S
A single 4 channel SP0504S device can be used to protect
four of the data lines in a HDMI/DVI interface. Two (2)
SP0504S devices provide protection for the main data lines.
Low voltage ASIC HDMI/DVI drivers can also be protected
with the SP0504S, the +V
CC
pins on the SP0504S can be
substituted with a suitable bypass capacitor or in some
backdrive applications the +V
CC
of the SP0504S can be
floated or NC.
SP0504S Series 0.85pF Diode Array
Additional Information