Littelfuse SP4040 Series - Manual

151 ©2012 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to
www.littelfuse.com/SPA for current information.
TVS Diode Arrays (SPA ™ Family of Products)
Revision: March 20, 2012
Lightning Surge Protection - SP4040 Series
SP4040 Series
SP4040
Description
Applications
The SP4040 provides overvoltage protection for
applications such as 10/100/1000 Base-T Ethernet and T3/
E3 interfaces. This device has a low capacitance of only
5pF making it suitable for PHY side Ethernet protection
and the capability to protect against both longitudinal and
differential transients. Furthermore, the SP4040 is rated
up to 100A (tp=2/10μs) making it suitable for line side
protection as well against lightning transients as defined
by GR-1089 (intra-building), ITU, YD/T, etc. The application
schematic provides the connection information for a PHY
side protection scheme of a single differential pair.
Features
t-JHIUOJOHQSPUFDUJPO
IEC61000-4-5, 75A
(8/20μs)
t-PXDMBNQJOHWPMUBHF
t-PXJOTFSUJPOMPTT
MPH
linear capacitance
t$PNCJOFEMPOHJUVEJOBM
and metallic protection
t$MBNQJOHTQFFEPG
nanoseconds
t40*$TVSGBDFNPVOU
package (JEDEC MS-012)
t6-7FQPYZNPMEJOH
t3P)4DPNQMJBOU
t5&-JOFDBSET
t #BTF5
Ethernet
t 5&BOE%4*OUFSGBDFT
t 454*OUFSGBDFT
Functional Block Diagram
Pinout
Note: Pinout diagrams above shown as device footprint on circuit board.
SP4040 Series 3.3V 75A Diode Array
SOIC-8 (Top View)
1
2
3
5 4
6
7
8
Pin 1 and 8
Pin 4 and 5
Pin 2, 3, 6,
and 7
Line out
Line out Line in
Line in
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
Application Example
The schematic shows protection for a single differential
pair as part of a larger high-speed data interface such as
Ethernet. The SP4040 provides both metallic (differential)
and longitudinal (common mode) protection from lightning
induced surge events as specified by regulatory standards
such as Telcordia’s GR-1089 CORE and ITU K.20 and 21.
The SP4040 protects against both positive and negative
induced surge events while the TeleLink fuse provides
overcurrent protection for the long term 50/60 Hz power
fault events.
to chipset
(Ethernet PHY,
T3/E3 PHY, etc.)
TeleLink (0461 1.25)
SP4040-02BTG
1
2
3
4
8
7
6
5
RoHS Pb GREEN