Littelfuse SP1001 Series - Manual (Page 3)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/10/13
TVS Diode Arrays
(SPA ® Diodes)
General Purpose ESD Protection - SP1001 Series
Time
Te
mperatur
e
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
Preheat Preheat
Ramp-up Ramp-up
Ramp-down Ramp-do
Critical Zone
T L to T P
Critical Zone
T L to T P
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (T
s(min)
) 150°C
- Temperature Max (T
s(max)
) 200°C
- Time (min to max) (t
s
) 60 – 180 secs
Average ramp up rate (Liquidus) Temp
(T
L
) to peak
3°C/second max
T
S(max)
to T
L
- Ramp-up Rate 3°C/second max
Reflow
- Temperature (T
L
) (Liquidus) 217°C
- Temperature (t
L
) 60 – 150 seconds
Peak Temperature (T
P
) 260 +0/-5 °C
Time within 5°C of actual peak
Temperature (t
p
)
20 – 40 seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (T
P
) 8 minutes max.
Do not exceed 260°C
Soldering Parameters
Part Numbering System
Ordering Information
Part Number Package Marking Min. Order Qty.
SP1001-02JTG SC70-3 A * 2 3000
SP1001-02XTG SOT553 A * 2 3000
SP1001-04JTG SC70-5 A * 4 3000
SP1001-04XTG SOT553 A * 4 3000
SP1001-05JTG SC70-6 A * 5 3000
SP1001-05VTG SOT963 A * 5 8000
SP1001-05XTG SOT563 A * 5 3000
Part Marking System
SP1001 -0 * * T G
Series
Number of Channels
02 = 2 Channel
04 = 4 Channel
05 = 5 Channel
Package
J = SC70-3, SC70-5 or SC70-6
X = SOT553 or SOT563
V = SOT963
T= Tape & Reel
G= Green
TVS Diode Arrays
(SPA ® Diodes)
Product Characteristics
Lead Plating
Matte Tin (SC70-x) Pre-Plated Frame
(SOT5x3, SOT963)
Lead Material Copper Alloy
Lead Coplanarity 0.0004 inches (0.102mm)
Substitute
Material
Silicon
Body Material Molded Epoxy
Flammability UL 94 V-0
Notes :
1. All dimensions are in millimeters
2. Dimensions include solder plating.
3. Dimensions are exclusive of mold flash & metal burr.
4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form.
5. Package surface matte finish VDI 11-13.
A **
A * *
Product Series
A = SP1001 series
Assembly Site
(varies)
Number of Channels
(varies)