Littelfuse SP1010 Series - Manual (Page 2)

©2012 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/SPA for current information.
56
TVS Diode Arrays
(SPA ™ Family of Products)
Revision: March 20, 2012
SP1010 Series
General Purpose ESD Protection - SP1010 Series
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of
the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Absolute Maximum Ratings
Symbol Parameter Value Units
I
PP
Peak Pulse Current (t
p
=8/20μs) 1.0 A
T
OP
Operating Temperature -40 to 85 °C
T
STOR
Storage Temperature -60 to 150 °C
Thermal Information
Parameter Rating Units
Storage Temperature Range -65 to 150 °C
Maximum Junction Temperature 150 °C
Maximum Lead Temperature (Soldering 20-40s) 260 °C
Electrical Characteristics (T
OP
=25ºC)
Parameter Symbol Test Conditions Min Typ Max Units
Reverse Voltage Drop V
R
I
R
= 1mA 7.0 7.8 8.5 V
Reverse Standoff Voltage V
RWM
I
R
≤1μA 6 V
Reverse Leakage Current I
LEAK
V
R
= 5V 0.1 1 μA
ESD Withstand Voltage 1 V
ESD
IEC61000-4-2 (Contact Discharge) ±8 kV
IEC61000-4-2 (Air Discharge) ±15 kV
Diode Capacitance 1 C
D
Reverse Bias = 0V 6 7 pF
Reverse Bias = 2.5V 3.5 pF
Note:
1. Parameter is guaranteed by design and/or device characterization.
Capacitance vs. Reverse Bias Insertion Loss (S21) I/O to GND
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
DC Bias (V)
Capacitance (pF)
-30
-25
-20
-15
-10
-5
0
5
0 0 0 0 1 0 0 0 1 0 0 1 0 1
Frequency (MHz)
Attenuation (dB)