Littelfuse P0080T023G5 - Manual (Page 5)

SIDACtor ® Protection Thyristors
359
Revised: March 28, 2012
© 2012 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Teccor ® brand SIDACtor ® DSL Protection Devices
Soldering Parameters
Physical Specifications
Environmental Specifications
Terminal Material 100% Matte-Tin Plated
Solderability EIA J-STD-002, TEST A.
Temp Cycling
Mil-STD-883F, Method 1010.8 Condition
C, -65°C to +150°C
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
Bias Humidity
JESD 22-A101-B 85°C , 85°CRH. 50V
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
Pressure Cooker
JEDEC 22-A102C No Bias, 121°C,
100%RH 96Hrs/192Hrs.
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
High Temp Storage JESD 22-A103C Con B. 150°C, no bias 1000Hrs
HTRB
JESD 22-108C
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
Thermal Shock
Mil-STD-883F, Method 1011.9 Condition
A, 0°C to 100°C
168 Hrs, 85°C /60%RH+3IR-Reflow,
260°C +5V, -0°C
C-SAM
As per flow, JSTD-020C pre&post
preconditioning test.
Wet Humidity
(Tin only)
NEMI standard: 60°C/93%RH
Reflow Condition
Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (T
s(min)
) +150°C
- Temperature Max (T
s(max)
) +200°C
- Time (Min to Max) (t
s
) 60-180 secs.
Average ramp up rate (Liquidus Temp (T
L
)
to peak)
3°C/sec. Max.
T
S(max)
to T
L
- Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (T
L
) (Liquidus) +217°C
- Temperature (t
L
) 60-150 secs.
Peak Temp (T
P
) +260(+0/-5)°C
Time within 5°C of actual Peak Temp (t
p
) 30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (T
P
) 8 min. Max.
Do not exceed +260°C
Time
Temper
at
ur
e
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Time
Temper
at
ur
e
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Part Marking Part Numbering
P 008 0 T023 G RP
Product family
Nominal Working voltage:
Construction variable:
Package
Surge Ipp rating
Packing Option
RP: Reel Pack P=SIDACtor
008=8V
0=single chip
T023=SOT23-5
Number of pins
5
Marking Code P08G
Pin 1 indicator
5