Factory Direct Hardware Von Duprin CX9947EO3 - Manual (Page 8)

9
Trim Selection
Standard Trim
Series 990
Heavy 10 gage (2.4mm) brass, bronze or stainless steel. DT, NL or TP functions
Series 991
Forged brass 3/4" (19mm) thick. Operational options — K, DT, NL or BE
Series 992
Forged brass 3/4" (19mm) thick. Operational options — L, DT, NL or BE
Series 370
Forged brass 7/8" (22mm) thick escutcheon.
Lever Design Options
To order: Use suffix lever number, example 9927L x 01.
Operation Options — Lever and Knob
Optional Trim
Series 696
Narrow design 3/16" (5mm) thick brass, bronze or stainless steel. DT, NL or TP functions. Flat pull grip.
Series 697
Narrow design 3/16" (5mm) thick brass, bronze or stainless steel. DT, NL or TP functions. Round wire pull grip.
Series 390
Offset solid brass, bronze or stainless steel 3/4" (19mm) wire pulls, 7" (178mm) in length. Through bolts to Chexit.
#01 #02 #03 #06 (Std.) #07 #12 #17
Standard operation, key
locks and unlocks lever. Night latch, key
retracts latch bolt, lever
is rigid. Use NL suffix,
i.e., 992L-NL. Blank escutcheon, lever
always active. Use BE
suffix, i.e., 992L-BE. Dummy trim, lever rigid
for pull operation. Use
DT suffix, i.e., 992L-DT.
990NL 991K
992L 370T
696 697
390