Factory Direct Hardware Von Duprin CX9947EO3 - Manual (Page 15)

16
Additional Information
Finishes
Color US Number BHMA Number A B C D E
Brass, Polished US3 605 Brass Plated Brass Buffed Anodized Brass
Brass, Satin US4 606 Brass Plated Brass Anodized Brass
Bronze, Satin US10 612 Bronze Anodized Bronze Anodized Bronze
Chrome, Polished US26 625 Stainless Steel Plated Stainless Steel Buffed Anodized Stainless Steel
Chrome, Satin US26D 626 Stainless Steel Plated Stainless Steel Anodized Plated
Aluminum, Anodized US28 628 Painted Painted Stainless Steel Anodized Painted
Stainless Steel, Satin ▲ US32D 630 Stainless Steel Stainless Steel Stainless Steel Anodized Stainless Steel
Duranodic Dark Bronze 313AN — Painted Painted Walnut Grain Vinyl Anodized Painted
Push Pad Options — Black Vinyl, Brass, Bronze or Stainless Steel.
▲ Finish available on Series 98, only.
Fire Label Rating/Applications
Single Door Double Door
Without Mullion
Same Direction
Without Mullion
With 9954 Mullion Vert./Vert.-Vert./Mrt. Double Express
Device 4' x 8' 4' x 10' 4' x 8' 8' x 8' 8' x 8'
UL Listing (1219mm x 2438mm) (1219mm x 3050mm) (1219mm x 2438mm) (2438mm x 2438mm) (2438mm x 2438mm)
CX98-F/CX99-F A Label X — X — —
CX9875-F/CX9975-F A Label X X — X —
CX9847-F/CX9947-F A Label ▲ — — — X X
CX9847WDC-F/CX9947WDC-F B Label ■ — — — X —
▲ Special latches available for up to 10'0" (3048mm).
■ Approved for up to 9'3" (2819mm)
Electrical Specifications
Voltage — 24 VDC
Current — .4 Ampere with 300 millisecond 16 Ampere
in-rush on arming
External Alarm Contact Rating — 24 VDC, 1 Ampere
Fire Alarm Input, External Inhibit Input, Door Position Input —
setup for Normally Closed contacts.
Handing of Doors
Left Hand
Orientation
Right Hand
Orientation
LHR
(Left hand reverse)
RHR
(Right hand reverse)
Outside
A — Center Case
B — Push Pad
End Cap
B — Push Pad
End Cap
C — Push Pad
D — Mechanism Housing E — Mechanism End Cap