Factory Direct Hardware Von Duprin CX9947EO3 - Manual (Page 6)

Chexit ™ Wood Door Concealed Vertical Rod Device
7
CX9847WDC and CX9947WDC concealed vertical rod devices for use on single or double wood doors, UL
listed for accident hazard installations.
CX9847WDC-F and CX9947WDC-F fire exit concealed vertical rod devices for use on 8' x 9'3" (2438mm x
2819mm) double wood doors, UL listed for B, C, D or E fire-labeled installations. For use on approved doors only.
Features
• Nonhanded • 5/8" (16mm) throw, latch bolt
• Field sizeable • Latch bolt deadlocking
• Adjustable top rod • Eight popular finishes
Dimensions
Touchbar height to finished floor 39-5/8" (1006mm) at center
Touchbar projection —
neutral 3-13/16" (97mm)
depressed 3-1/16" (78mm)
Center case 8" x 2-1/4" x 2-3/4" (203mm x 57mm x 70mm)
Device length — Short 3' (914mm) 2'10" to 3' (864mm to 914mm) door size
Long 4" 1 (1219mm) 3'4" to 4' (1016mm to 1219mm) door size
Vertical rods — round Two piece adjustable top rod
Strikes and Fasteners
Device is furnished with standard 338 and 385A strikes. For optional strikes, finishes, applications, dimensions
and minimum door stile information refer to page 10.
A combination of fasteners are included for surface mounting and through bolting to trim on 1-3/4" (44mm)
and 2-1/4" (57mm) thick doors.
Device Option
Cylinder dogging, page 13
Scalp Plate
Device is furnished standard with an 8" (203mm) long scalp plate for easy access to rods.
For How-To-Order Information on all devices, see page 17.
For electrical specifications, see page 16.
For power supply and power transfer information, see page 12.
Standard 1-1/4" (32mm) mortise cylinder
must be ordered separately.
575 575-2
576A 576B