Crown Audio IQ-PIP-USP2_CN - Manual (Page 24)

IQ-PIP-USP2/CN
Page 24 IQ-PIP-USP2/CN Reference Manual
6.1.4 System Location
This parameter is user-settable to
any alpha-numeric string of 30 char-
acters or less. The intended use is to
communicate a unique description
of the device location to a network.
This object is stored in presets.
6.1.5 System Contact
This parameter is user-settable to
any alpha-numeric string of 30 char-
acters or less. The intended use is to
communicate the designated con-
tact person (in case of service or
other network issue) to the network.
This object is stored in presets.
6.1.6 Firmware Version
This parameter is configured at the
factory and is read-only. The in-
tended use is to communicate the
presently loaded CobraNet module
firmware version to a network.
6.1.7 MAC Address
This parameter is configured at the
factory and is read-only. The setting
defines a unique IEEE802-recog-
nized address for use with any
Ethernet based network.
6.1.8 IP Address
This parameter is user-configured
for IP based networks. The intended
use is to uniquely identify the device
with respect to the available IP ad-
dress space. The IP address must
be configured in order to control/
monitor the device with IP based
software.
6.2 CobraNet Input
Routing
CobraNet input routing includes the
following controls:
6.2.1 CobraNet Receive
Bundles
The IQ-PIP-USP2/CN can receive
four unique CobraNet Bundles (RxA,
RxB, RxC, RxD). Each Bundle in-
cludes an “Active” indicator to indi-
cate whether the particular Bundle
is being actively transmitted onto
the network.
6.2.2 CobraNet Receive
Channels
Each CobraNet Bundle contains up
to eight digital audio channels. Each
channel is selected at its respective
transmitter to contain none, 16-, 20-
or 24-bit audio sample data. A total
of two audio channels can be pro-
cessed by the IQ-PIP-USP2/CN at
any one time. Any of the eight chan-
nels on a bundle can be can be
routed to either of the two process-
ing channel inputs on the IQ-PIP-
USP2/CN.
• Channel Label: Each received
digital audio channel can be
assigned a user-specified label
to indicate intended use, source
or other information. The label is
stored in presets along with the
bundle number and receive
channel information.
6.3 CobraNet Output
Routing
CobraNet output routing includes
the following controls:
6.3.1 CobraNet Transmit
Bundles
The IQ-PIP-USP2/CN can transmit
up to four unique CobraNet Bundles
(TxA, TxB, TxC, TxD). Each Trans-