Swanstone MF-1W - Installation - Manual (Page 9)

5. Install one leg leveler on each leg using the screw
and nut included with each unit. Do not completely
tighten the screws until the laundry tub is in its final
location and can be leveled.
1b. Attach Filler Brackets and Wall Mount —
MF-11W and MF-22W (Single and Double
Bowl Models)
1. Place the laundry tub upside down on a flat surface.
Protect the top edges of the laundry tub from
scratches or other damage by placing cardboard or
other scratch resistant material on the floor.
2. Find the right-side filler bracket. Install it with the
end of the filler bracket fitted between the outside of
the sink and guide posts (1). Also place the filler
bracket over guide post (2) and the screw hole in
the bottom of the laundry tub.
3. Using a flat blade screwdriver, install one panhead
screw to hold the filler bracket in place. Do not
overtighten the screw.
4. Install the left-side filler bracket in the same manner.
LT-020
LT-019
2
1
LT-018
LT-004
SCREW
LEG LEVELER
NUT
800-325-7008 9 The Swan Corporation – Swanstone
Installation Procedure