Swanstone R-38NEO - Specification User Manual
Veritek, Shower floors, Neo angle shower floors with fit-flo™ drain
Swan • St. Louis, MO 63101 • (800)325-7008 • swanstone.com
96
NEO Angle Shower Floors
With Fit-Flo™ Drain
Veritek
®
SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(See page 2 for detailed information.)
R-36NEO, R-38NEO
Neo Angle Shower Floors
A
B
12"
A
3" dia.
B
12"
R-36NEO
R-38NEO
A:
36"
38"
B:
18"
20"
25"
16
7
/
8
"
1
1
/
4
"
5
1
/
2
"
4
1
/
2
"
6
/
25
"
2
3
/
4
"
7
/
32
"
2
1
/
4
"
4" 3
5
/
8
"
7
/
32
"
F E AT U R E S
• Will not mold or mildew, no grout to clean.
• Coordinates with other Swanstone or Veritek
®
products.
• Pebbled, slip-resistant surface.
• Made of Veritek
®
with no surface coating to chip or crack.
Nominal
Rough-In Dimensions
Model
Size
A
B
25"
12"
R-36NEO
36" x 36"
36-1/8"
18-3/16"
25-1/8"
12-3/16"
R-38NEO
38" x 38"
38-1/8"
20-3/16"
25-1/8"
12-3/16"
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
S P E C I F I C AT I O N S
NEO Angle Shower Floors With Fit-Flo
™
Drain
Ship Ship
Carton
Model
Part
Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
R-36NEO FN00036MD
36" D x 36" W
40
– 42 x 42 x 10 11
(914 mm x 914 mm)
R-38NEO FN00038MD
38" D x 38" W
44
– 44 x 43 x 10 11
(965 mm x 965 mm)
Includes: One code-approved compression-molded Veritek
®
shower floor with
molded-in Fit-Flo drain and installation instructions.
Packaging: Each floor packed in a rectangular carton.
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
Model
A
B
R-36 NEO
36" 18"
R-38 NEO
38" 20"
R-36NEO, R-38NEO
Neo Angle Shower Floors
A
B
12"
A
3" dia.
B
12"
R-36NEO
R-38NEO
A:
36"
38"
B:
18"
20"
25"
16
7
/
8
"
1
1
/
4
"
5
1
/
2
"
4
1
/
2
"
6
/
25
"
2
3
/
4
"
7
/
32
"
2
1
/
4
"
4" 3
5
/
8
"
7
/
32
"
C O L O R S
(See inside back cover for color sample.)
S TA N D A R D S A N D R AT I N G S
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet – page 175.
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal-
scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
S U P P O R T D O C U M E N T S
Installation instructions available at swanstone.com.