Swanstone SBF-3060L_R - Specification - Manual

Swan • St. Louis, MO 63101 • (800)325-7008 • swanstone.com 90
Barrier Free Shower Floors
Available in Right or Left Side Drain
SBF-1260 Shower Ramp
SBF-3060R
(shown)
Barrier-Free Shower Floors
With Fit-Flo™ Drain
SWANSTONE SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 10-year – Commercial
Manufactured from Swanstone solid surface
(See page 2 for detailed information.)
S P E C I F I C AT I O N S
Barrier Free Shower Floors With Fit-Flo ™ Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
SBF-3060L SB03060LM 30" D x 60" W (left drain) 64 – 66 x 36 x 10 14
(762 mm x 1524 mm)
SBF-3060R SB03060RM 30" D x 60" W (right drain) 64 – 66 x 36 x 10 14
(762 mm x 1524 mm)
BF-1260 BF01260 12" D x 60" W (ramp) 25 FedEx 66 x 14 x 2 1.07
(305 mm x 1524 mm)
Includes: One code-approved compression-molded Swanstone floor with
molded-in Fit-Flo drain and installation instructions.
Packaging: Each floor packed in a rectangular carton.
F E AT U R E S
• Reinforced solid surface means color and texture run all
the way through and cannot wear away.
• Will not mold or mildew, no grout to clean.
• Coordinates with Swanstone shower and bath systems.
• “S” pattern molded into floor provides a
slip-resistant surface.
Nominal Rough-In Dimensions
Model Size 60" 30" 8" 15"
SBF-3060L 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"
Barrier Free (left drain)
SBF-3060R 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"
Barrier Free (right drain)
Universal Design
A C C E S S O R I E S
See page 101 for complete listing of all Universal Design accessories.
Recommended for high-use traffic areas and commercial surfaces.
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall. Meets ADA requirements
for use in existing bathing facilities but not for new construction.
C O L O R S
(See inside back cover for color sample.)
S TA N D A R D S A N D R AT I N G S
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet – page 175.
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal-
scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
S U P P O R T D O C U M E N T S
Installation instructions available at swanstone.com.
Solid Colors:
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
Aggregate Colors:
• Acorn (123)
• Almond Galaxy (046)
• Arctic Granite (035)
• Baby’s Breath (168)
• Barley (091)
• Bermuda Sand (040)
• Canyon (124)
• Caraway Seed (169)
• Cloud Bone (126)
• Cloud White (125)
• Cornflower (063)
• Glacier (121) • Golden Steppe (128)
• Gray Granite (042)
• Ice (130)
• Indian Grass (071)
• Mountain Haze (129)
• Night Sky (012)
• Pebble (072)
• Prairie (122)
• Sierra (094)
• Tahiti Desert (050)
• Tahiti Gray (053)
• Tahiti Ivory (059)
• Tahiti Matrix (058)
• Tahiti Sand (051)
• Tahiti Terra (055)
• Tahiti White (011)
• Tundra (131)
• Winter Wheat (060)