R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Elite Manual - Manual (Page 5)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
!
: (937) 328-5100
FAX: (937) 325-5319
5/31
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
1.2 Type mark coding
D2H and D2C can be summarized as "crane motor control systems, which controls the speed by
changing the frequency of supply voltage of a squirrel cage motor". A stepless speed adjustment can be
achieved by this method.
Type marking is shown below.
Device name
D2H=
ControlMaster CMEH
D2C= ControlMaster CMET
Power rating class
002 – 110
Supply voltage
F
380 - 500VAC, 50/60Hz
Control voltage
Y 42VAC,
50/60Hz
P 48VAC, 50/60Hz
T 115VAC, 50/60Hz
V 230VAC, 50/60Hz
D2H
007
F
V
53 Revision code
The latest revision may differ
D2H 007 F V 53 A 0 0 1 0
Braking type
A External
resistor
B Internal resistor (included only D2C up to 015F) A
Mounting
0 Standard
panel 0
Emission level
0
Unlimited (non EU-area or non-grounded network)
N Limited (EU-area, grounded network) 0
Boards
0 Standard
1
Standard with speed supervision
2 Profibus
3 Profibus with speed supervision
8 Relay
9
Relay with speed supervision 1
Special
0 None
L Varnished
boards 0