Ingalls 35655 - Manual (Page 2)

Complete Kit Contents
Full Assembly attached to Control Arm
ALWAYS CHECK FOR SUSPENSION CLEARANCE
Modifying any suspension component may change other part clearances and cause binding or interferences. After installing any Ingalls’
product, the suspension must be checked for binds or interference between all components, other arms and the chassis. Be sure that all control
arms, struts and steering ends move freely through the full movement of the suspension (springs may need to be removed to fully check
component travel). Installing any Ingalls’ product on a modified vehicle (lowered or raised) from the original factory design requires a detailed
check of all suspension components and their movements. Ingalls recommends that a trained technician install all products.
Limited Warranty
Subject to Disclaimer. All Ingalls products are warranted against defects in materials and workmanship for ninety (90) days from date of
purchase. During the warranty period, Ingalls will repair, or at its option replace at no charge, components that prove to be defective. The
product must be returned, shipping prepaid, to Ingalls facility. This limited warranty does not apply if the product is damaged by accident or
misuse. The foregoing warranty is in lieu of all other warranties expressed or implied including but not limited to any implied warranty of
merchantability, fitness, or adequacy for any particular purpose or use. Ingalls shall not be liable for any special, incidental or consequential
damages whether in contract, tort, or otherwise resulting from the use of the inability to use the product.
Warranty Disclaimer
Use of this product in competition, or use on vehicles altered from original manufacturer’s specifications or settings, EXPRESSLY VOIDS
WARRANTY. The user is urged to inspect for suspension binding or interference when the product is used in these manners. However, due to
the varying conditions and manner of use which the product will be subjected to in such uses, Ingalls Engineering Co., Inc. makes no warranties,
either express or implied, including any warranty of merchantability or fitness for a particular purpose for use in competition or with specifications
or settings other than those specified by the original manufacturer’s specifications.
Copyright © 2005 Ingalls Engineering Co., Inc.