Ingalls 93055 User Manual
Ingalls For the car
© Ingalls Engineering Co., Inc. - 2011 Cherry Street, Suite 104 - Louisville, CO, 80027 (303) 665-7800 www.ingallseng.com
Installation Instructions for 93055
Ingalls Engineering Stiffy ™ Engine Torque Damper for:
2001-2003 Acura CL, 1999-2003 Acura TL and 1998-2002 Honda Accord 3.0L V6
The Stiffy ™ Adjustable Engine Torque Damper is engineered to reduce deflection under hard acceleration and cornering for
improved performance and power to weight transfer. Deflection in the motor mounts, as with the chassis and suspension, is a
formidable enemy in power and weight transfer, robbing valuable horsepower and control. The innovative, built-in damper eliminates
the huge amounts of “torque shock” that result from wheel-hop and once installed; transfers more power to the road and improves
acceleration, shifting, and overall control and balance. The adjustable feature allows the assembly to be tuned and pre-loaded for
racing and street applications.
CAUTION: Observe proper safety and repair procedures for installation of all chassis parts. Some chassis parts require
specialized tools and experience and therefore MUST be installed by a qualified technician; otherwise and unsafe vehicle and/or
personal injury could result. Wear safety glasses and other protection.
WARNING: Before beginning, check for any damaged or loose suspension connections. Loose connections here indicate worn
or broken parts which MUST BE REPLACED. Failure to replace a damaged or worn spindle and/or link may cause the wheel to
separate from the vehicle, possibly resulting in serious personal injury. Installer MUST check for proper clearance. Modification(s)
may be required. Please proceed ONLY if the vehicle owner is completely aware of these potential suspension modifications.
Estimated Installation Time: 0.5 Hour
Technical Rating: Easy
Included Parts List:
Required
Tools
for
Installation:
1 - Stiffy ™ Engine Torque Damper
Metric Sockets & Hex keys
1
-
Engine
Bracket
Metric
Box
Wrenches
1 - Chassis Bracket
Crescent Wrench (up to 27mm)
1
–
Hardware
Kit
3/8”
Torque
Wrench
3/8” Socket Driver (Wrench)
Image #1
Step 1: Remove the 2 bolts from the
passenger side engine mount. Marked “A” in
image #1.
Step 2: Install the Engine Bracket over the
engine mount holes with the narrow bolt
flange to the rear and the wider bolt flange to
the front.