Peerless-AV WL-ESA763PU-200 - Installation User Manual

Page 5

Text mode
Original mode

5 of 25

ISSUED: 08-24-12 SHEET #: 180-9034-2 10-30-12

1/4-20 X 17MM SCREWS

WALL PLATE

WALL ARM

SLIDE PLATE

WALL PLATE RAIL

NOTE: If mounting wall arm (A) to wood stud walls, slots on wall plate must align to wood studs.

Determine desired location of display center detailed in step 2.

Measure the distance from the center of wall arm (A) to desired display center. Loosen four 1/4-20 x 17mm screws
using 5mm allen wrench (I). Slide wall arm assembly 4-1/2" to the left or right as shown in fi gure 1.1. NOTE: Align
bevels (dots) of slide plate with bevels (dots) of wall plate rails as shown in detail 1 then retighten 1/4-20 x 17mm
screws.

Do not adjust arm while display is attached.

Skip to page 6 for Wood Stud Installation.
Skip to page 7 for Concrete and Cinder Block Installation.

Optional Horizontal Adjustment of Wall Arm on Wall Plate

fi g. 1.1

DETAIL 1