Peerless-AV WL-ESA763PU-200 - Installation - Manual (Page 23)

23 of 25 ISSUED: 08-24-12 SHEET #: 180-9034-2 10-30-12
K
J
A
G CORD
DETAIL 3
SLOT
Cable Management
NOTE: Make sure extension cord (not included) has
enough slack to allow full movement of the arm.
Run extension cord (not included) through top or
bottom of arm (A) and signal cable(s) through other
side of arm in order to avoid interference with the
signal. Lock into place by snapping cable covers (J
& K) onto mount as shown. Display may have to be
moved for easy access.
Optional: If additional cable management is
required route cable ties (G) through slots of arm (A)
as shown in detail 3.
Plug extension cord into power source.
20
Snap wall plate covers (F) to top and bottom of wall
plate rails as shown. 21
F
WALL PLATE RAIL