Peerless-AV WL-ESA763PU-200 - Installation - Manual (Page 15)

15 of 25 ISSUED: 08-24-12 SHEET #: 180-9034-2 10-30-12
Center universal adapter bracket (B) horizontally on back of display as shown in fi gure 6.6.
Tighten two 1/4-20 x 1.25" screws. Reinstall four 1/4-20 x .6" screws using 5mm allen wrench (I) into fi xed-stop
position 1 as shown in fi gure 6.7.
6-6
6-7
fi g. 6.7
fi g. 6.8
FIXED STOP POSITION #1 WITH
1/4-20 x .6" SCREWS
fi g. 6.6
1/4-20 x 1.25" SCREWS
B
N
Q
Adjust the position of the enclosure (N) to your desired location as shown in fi g. 6.8 Once in position, tighten the
four 1/4-20 x 1/2 socket head screws (Q) shown in fi g. 6.8 using 4mm allen wrench (L) and a 7/16" open end
wrench.
Skip to step 9