PowerWalker AS_400 Card 3 - Manual (Page 12)

12
4.2. Main menu
There are six item can be setting or inquire firmware version, user need base on menu number
and enter the correct menu
-----------------------------------------------------------------------------
Dry contact Management Card
-----------------------------------------------------------------------------
1. Function Segment Logic
2. Output Segment Function Configure
3. Input Segment Function Configure
4. Function Segment Active Delay Time
5. Return to Default Configuration
6. Firmware Version
0. Exit
-----------------------------------------------------------------------------
Please Enter Number:
Figure12. Main menu
Type any list number then will change to 4.3~4.9 menu, if user enter number not include of list,
the window will show “Please Enter Correct Number:” string as below, this menu will possible
show in any setting menu, if user do not depend on prompt number and enter a wrong number
Please Enter Correct Number:
Figure13. Un-correct number prompt menu
4.3. Function Segment Logic menu
When main menu Type 1 and press Enter. The menu displays the Segment settings logic and
current setting status as below, in this menu type 0 number, the menu will return to Figure12. Main
menu.