Peterson Strobe Center 5000-II - Manual (Page 32)

Page 30
STRCH = XXXX KEY = C
NOTE = C# +XX.X
OCTV= 4
DONE NEXT Key #3 holds values entered - advances screen to save
current STRCH tuning values.
Key #4 enters and holds value - goes to next note.
1 2 3 4
Use the PITCH UP and/or the PITCH DOWN Control to adjust the number of cents deviation from standard, Equal
Temperament tuning for the note C# in Octave 4. You may enter this value with a precision of 1/10 of 1 cent.
Whenever you have modified as many Octaves and Note values as you require for your Custom STRCH file, you may
exit the Stretch Edit sequence by using the #3 Function key (DONE) and then the ENTER button. The values you have
entered will be saved and the tuner will return to the RUN Mode, using the programmed STRCH tuning values.
Alternatively, press the #4 Function key when the displayed Stretch file value for Octave 4, Note C# is correct. The
display will increment the note to D.
STRCH = XXXX KEY = C
NOTE = D +XX.X
OCTV= 4
DONE NEXT
Key #3 holds values entered - advances screen to save
current STRCH tuning values.
Key #4 enters and holds value - goes to next note.
1 2 3 4
Use the PITCH UP and/or the PITCH DOWN Control to adjust the number of cents deviation from standard, Equal
Temperament tuning for the note D in Octave 4. You may enter this value with a precision of 1/10 of 1 cent. Whenever
you have modified as many Octaves and Note values as you require for your Custom STRCH file, you may exit the
Stretch Edit sequence by using the #3 Function key (DONE) and then the ENTER button. The values you have entered
will be saved and the tuner will return to the RUN Mode, using the programmed STRCH tuning values. Alternatively,
press the #4 Function key when the displayed Stretch file value for Octave 4, Note D is correct. The display will
increment the note to D#.
The same procedure will be continued sequentially through the notes E, F, F<, G, G<, A, and A<, until the screen
increments to the note B:
STRCH = XXXX KEY = C
NOTE = B +XX.X
OCTV= 4
DONE NEXT Key #3 holds values entered - advances screen to save
current STRCH tuning values.
Key #4 enters and holds value - goes to next note.
1 2 3 4
Use the PITCH UP and/or the PITCH DOWN Control to adjust the number of cents deviation from standard, Equal
Temperament tuning for the note B in Octave 4. You may enter this value with a precision of 1/10 of 1 cent. Whenever
you have modified as many Octaves and Note values as you require for your Custom STRCH file, you may exit the
Stretch Edit sequence by using the #3 Function key (DONE) and then the ENTER button. The values you have entered