B&B Electronics EIR410-2SFP-T - Manual - Manual (Page 14)

Hardware Description
1
0 Manual Documentation Number EIR405-T – 0912m
www.bb-elec.com
www.bb-europe.com
To remove the LC fiber cable and SFP transceiver, follow the steps below:
First, press the upper side of the LC connector down and pull it out before releasing.
Remove LC connector
Second, swivel the metal latch away from the switch and pull the transceiver out.
Pull out from the transceiver
Cabling
Use unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable.
10Mbps: Use category 3, 4, 5 or greater cable
100Mbps: Use category 5 or greater
1000Mbps: Use category 5e or greater cable
Cable distances should be less than 100 meters (328 ft.) long.