B&B Electronics 711FX3-ST - Manual - Manual (Page 153)

(Revised 2010-2-24) Page 153 of 155
KEY SPECIFICATIONS (711FX3)
Switch Properties
Number of MAC Addresses: 8,000
Aging Time: Programmable
Latency Type: 2.6 µs
Switching Method: Store & Forward
Physical
Height:
4.25” / 11.76 cm
Width: 2.40” / 6.10 cm
Depth: 4.60” / 11.67cm
Weight (max): 1 lb 6 oz / 0.62 kg
Din-Rail mount: 35mm
Electrical
Redundant Input Voltage: 10-49VDC (Regulated)
Input Current (max):
455mA max. @ 24VDC
Input Ripple:
Less than 100 mV
N-TRON Power Supply: NTPS-24-1.3
(1.3 Amp@24VDC)
Environmental
Operating Temperature:
-40°C to 70°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 5% to 95%
(Non Condensing)
Operating Altitude 0 to 10,000 ft.
Shock and Vibration
(bulkhead mounting)
Shock: 200g @ 10ms
Vibration/Seismic: 50g,
5-200Hz,Triaxial
Reliability
MTBF: >2 Million Hours
Warranty: 3 years from the date of purchase.
Connectors
10/100BaseTX: (8) RJ-45 Copper Ports
100BaseFX: (3) SC or ST Duplex Ports
Recommended Wiring Clearance:
Front: 4" (10.16 cm)
Top: 1" (2.54 cm)
Bottom: 1" (2.54 cm)
Network Media
10BaseT:
>Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX, 1000BaseSX
Multimode:
50-62.5/125µm
100BaseFXE, 1000BaseLX
Singlemode: 7-10/125µm