beautypg.com

Administration – system, continued – B&B Electronics 708M12-HV - Manual User Manual

Page 24

background image

(Revised 8/5/2009)

Page 24 of 136

Administration – System, Continued…


By selecting the Modify button, you will be able to change the switch’s IP Address, Subnet Mask, Gateway,
Name, Contact information, and the Location of the switch through the web management features. It is
recommended to change the TCP/IP information through the Command Line Interface (CLI) initially, but it
defaults to the following:

IP Address – 192.168.1.201
Subnet Mask – 255.255.255.0
Gateway – 192.168.1.1

See also other documents in the category B&B Electronics Accessories communication: