B&B Electronics 708M12-HV - Manual - Manual (Page 116)

(Revised 8/5/2009) Page 116 of 136
CLI Commands, Continued…
Ping a Host
Command Name Ping
Description Ping a host
Syntax ping [-t] [-n count] [-w timeout] target_name
Parameters target_name
IP Address or host name.
-t
Ping the specified host until stopped.
To see statistics and continue - type Space;
To stop - type Control-C.
-n count
Number of echo requests to send.
-w timeout
Timeout in milliseconds to wait for each reply.
Example N-TRON/Admin> ping 192.168.1.119
…
N-TRON/Admin> ping –n 6 192.168.1.119
…
N-TRON/Admin> ping –t 192.168.1.119
…
N-TRON/Admin> ping –w 2000 192.168.1.119
Reply from 192.168.1.119: time=970ms
Reply from 192.168.1.119: time<10ms
Reply from 192.168.1.119: time<10ms
Ping statistics for 192.168.1.119:
Packets: Sent = 4, Received = 3, Lost = 1 (25% loss)
Approximate round trip times in milliseconds:
Minimum = 0ms, Maximum = 970ms, Average = 320ms
Notes