beautypg.com

Regulatory test mode support, Figure 8 - full fcc/ic label, Figure 9 - minimum fcc/ic label – B&B Electronics WLNN-EK-DP551 - Product Specification User Manual

Page 36: 6 regulatory test mode support

background image

B&B Electronics, Inc.

Airborne WLNN DP550 Family Databook

36

Figure 8 - Full FCC/IC Label

Figure 9 - Minimum FCC/IC Label

When the device is so small or for such use that it is not practicable to place the
label shown in Figure 8, the label shown in Figure 9 may be used, however the
information required shall also be placed in a prominent location in the instruction
manual or pamphlet supplied to the user. Alternatively, the required information
shown in Figure 8 shall be placed on the container in which the device is
marketed.

In all cases the FCC and IC identifiers must be displayed on the device in which
the module is installed.

12.6 Regulatory Test Mode Support

The Airborne Device Server includes support for all FCC, IC and ETSI test
modes required to perform regulatory compliance testing on the module, please
contact B&B Technical Support for details on enabling and using these modes.