B&B Electronics 232SPS2 - Manual - Manual (Page 24)

C-2 Appendic C: Software Hints 232SPS2-0812 Manual
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5104
MODE COM1: 96,n,8,1,p
If any of the parameters are omitted, the most recent setting will
be used. It is recommended that the "p" option be used for the retry
option. If the "p" is not used, a device busy error may occur. To
send data out the serial port, the following command can be entered
at the DOS prompt:
TYPE filename > COM1
This command will send filename out COM1.