B&B Electronics 714FX6-SC_ST - Manual - Manual (Page 39)

(Revised 2010-2-24) Page 39 of 154
DHCP – Server – Setup IP Maps, Continued…
The Single IP type of mapping is used to create a static IP address for an individual client. The following
information is required:
Network Profile
An existing network profile to which the IP map applies.
IP
The static IP address to offer to a client.
Unique ID
The unique identifier that must match either the client identifier (Option 61) or the client’s hardware address (MAC).
Format
Designates how the Unique ID is interpreted.