Rainbow Electronics AT90S1200 User Manual
Features, Pin configuration

1
Features
•
Utilizes the AVR
®
RISC Architecture
•
AVR – High-performance and Low-power RISC Architecture
– 89 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Up to 12 MIPS Throughput at 12 MHz
•
Data and Non-volatile Program Memory
– 1K Byte of In-System Programmable Flash
Endurance: 1,000 Write/Erase Cycles
– 64 Bytes of In-System Programmable EEPROM
Endurance: 100,000 Write/Erase Cycles
– Programming Lock for Flash Program and EEPROM Data Security
•
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– SPI Serial Interface for In-System Programming
•
Special Microcontroller Features
– Low-power Idle and Power-down Modes
– External and Internal Interrupt Sources
– Selectable On-chip RC Oscillator for Zero External Components
•
Specifications
– Low-power, High-speed CMOS Process Technology
– Fully Static Operation
•
Power Consumption at 4 MHz, 3V, 25
°C
– Active: 2.0 mA
– Idle Mode: 0.4 mA
– Power-down Mode: <1 µA
•
I/O and Packages
– 15 Programmable I/O Lines
– 20-pin PDIP, SOIC and SSOP
•
Operating Voltages
– 2.7 - 6.0V (AT90S1200-4)
– 4.0 - 6.0V (AT90S1200-12)
•
Speed Grades
– 0 - 4 MHz, (AT90S1200-4)
– 0 - 12 MHz, (AT90S1200-12)
Pin Configuration
8-bit
Microcontroller
with 1K Byte
of In-System
Programmable
Flash
AT90S1200
Rev. 0838H–AVR–03/02
Document Outline
- Features
- Pin Configuration
- Description
- Architectural Overview
- Timer/Counter0
- Watchdog Timer
- EEPROM Read/Write Access
- Analog Comparator
- I/O Ports
- Memory Programming
- Electrical Characteristics
- Typical Characteristics
- AT90S1200 Register Summary
- Instruction Set Summary
- Ordering Information(1)
- Packaging Information
- Table of Contents