Rainbow Electronics UC864 - Manual (Page 6)

UC864-E/G Product Description
80281ST10034a Rev. 1 - 08/08/2008
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 6 of 36
1 Overview
The Telit UC864-E/G module are small, lightweight, low power consumption and RoHS compliant
devices that allow digital communication services wherever a WCDMA/HSDPA (850 ,1900 and 2100
MHz for UC864-G and only 2100 MHz for UC864-E), GSM 850, 900, DCS 1800 or PCS 1900 network
is present with additional options like an integrated GPS receiver (in UC864-G only).
The
UC864-E/G is a low cost connector-less best solution for medium to high quantity projects.
The
UC864-E/G is provided with an 80 pin Molex board to board connector and a 50 Ohm Murata RF
connector. The UC 864-G is still provided with an additional 50 Ohm Murata RF connector for GPS
receiver.
The
UC864-E/G module includes features like GPRS/EDGE CLASS 12, Voice, Circuit Switched Data
transfer, Fax, Phonebook and SMS support, embedded TCP/IP stack and battery charging
capabilities.
The
UC864-E/G is specifically designed and developed by Telit for OEM usage and dedicated to
portable data, voice and telemetric applications such as:
•
Telemetry and Telecontrol (SCADA applications)
•
Security systems
•
Automated Meter Reading (AMR)
•
Vending machines
•
POS terminals
•
PDAs and Mobile Computing
•
Phones and Payphones
•
Automotive and Fleet Management applications
•
Battery powered applications needing a battery charger
•
Return channel for digital broadcasting
•
Position reporting and tracking with integrated GPS
The UC864-E/G supports the following functionalities
•
EASY GPRS (AT driven embedded TCP/IP protocol stack)
•
EASY SCAN (full GSM frequency scanning)
From the interface point of view, the
UC864-E/G provides the following:
•
USB2.0 for AT commands
- Baud rate up to 12 Mbps
•
Full RS232 UART, CMOS level (ASC0) interface for AT commands: