Rainbow Electronics UC864 - Manual (Page 22)

UC864-E/G Product Description
80281ST10034a Rev. 1 - 08/08/2008
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 22 of 36
2.15 Converters
2.15.1 ADC Converter
The on board ADCs are 8-bit converter. They are able to read a voltage level in the range of 0 - 2 volts
applied on the ADC pin input, store and convert it into 8 bit word.
Min Max Units
Input Voltage range 0 2,0 Volt
AD conversion - 8 bits
Resolution - < 8 mV
Sampling rate 1 (idle) 60 (on traffic) sec
2.15.2 DAC Converter
The on board DAC is a 16 bit converter, able to generate an analogue value based a specific input in
the range from 0 up to 65536. However, an external low-pass filter is necessary. See the HW User
Guide for the details.
Min Max Units
Voltage range (filtered) 0 2,6 Volt
Range 0 65536 Steps