1 gps sensitivity, 2 gps consumption, 3 gps driving – Rainbow Electronics UC864 User Manual
Page 14

UC864-E/G Product Description
80281ST10034a Rev. 1
- 08/08/2008
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 14 of 36
• Supports 12-Channel GPS L1 1575.42 MHz
• Accuracy < 3m (CEP68 : 68% Circular Error Probable )
• GPS NMEA 0183 output format
• Date WGS-84
• Dedicated GPS AT commands
• Low power consumption
2.8.1
GPS Sensitivity*
Time to first fix
Hot start
Autonomous < 1s
Warm start
Autonomous < 32s
Cold start
Autonomous < 40s
Sensitivity
Tracking
Up to -157 dBm
* NOTE: Performance will vary depending on environment, antenna type, signal conditions, satellite
geometry, and handset implementation.
2.8.2
GPS Consumption*
The typical current consumption of the GPS part of the
UC864-G module
is:
UC864-G
Mode
Average(mA)
Mode description
IDLE mode with GPS ON full power mode
Stand by mode; no call in progress; GPS ON
AT+CFUN=1
WCDMA
145
GSM
104
AT+CFUN=4
WCDMA
104
GSM
104
* Except external active GPS antenna
2.8.3
GPS Driving
The GPS functions are driven from the Base Band processor trough a dedicated AT command set
available in a separate specification.