Rainbow Electronics T89C51RD2 - Manual (Page 19)

Rev. F - 15 February, 2001 19
T89C51RD2
It is possible to use timer 2 as a baud rate generator and a clock generator simultaneously. For this configuration,
the baud rates and clock frequencies are not independent since both functions use the values in the RCAP2H and
RCAP2L registers.
Figure 6. Clock-Out Mode C/T2 = 0
:2
EXF2
TR2
OVEFLOW
T2EX
TH2
(8-bit)
TL2
(8-bit)
TIMER 2
RCAP2H
(8-bit)
RCAP2L
(8-bit)
T2OE
T2
XTAL1
T2CON reg
T2CON reg
T2CON reg
T2MOD reg
INTERRUPT
Q D
Toggle
EXEN2