RocketFish RF-TVMFM02 - User Manual - Manual (Page 9)

9 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
RF-TVMFM02V2 TV Wall Mount
Step 3 Install the vertical TV brackets - Option 2: Installing for an irregular or
obstructed back
1 Place the spacers (K) into the screw holes on the back of your TV.
2 Align the holes on the right vertical TV bracket (B) and left vertical TV bracket (C) with the spacers on the
back of your TV. The brackets are marked “R” for the right bracket and “L” for the left bracket. Make sure the
brackets are level.
3 Place the M4/M5 washers (I) or M6/M8 washers (J) over the holes in the TV brackets that align with the screw
holes on the back of your TV, then insert the M4 screws (H), M5 screws (M), M6 screws (O), or M8 screws (R)
through the washers.
4 Tighten the screws until they are snug against the TV bracket. Do not over tighten.
You’ll need
I (4) J (4) H (4) M (4)
R (4) Phillips screwdriver
OR
OR OR
Screws Washers
Spacers
K (4)
O (4)
Level
TV brackets
(B and C)
RF-TVMFM02V2_13-0600_MAN_V4_ENG - GIFs.fm Page 9 Tuesday, July 9, 2013 8:02 AM