Cobalt Digital COMPASS 9362 HD_SD-SDI Test Signal Generator - Manual (Page 46)

3
Troubleshooting
3-20 9362 PRODUCT MANUAL 9362-OM (V4.1)
9362 Card Edge Status/Error Indicators and Display
Figure 3-5 shows and describes the 9362 card edge status indicators and
display. These indicators and the display show status and error conditions
relating to the card itself and remote (network) communications (where
applicable). Because these indicators are part of the card itself and require no
external interface, the indicators are particularly useful in the event of
communications problems with external devices such as network remote
control devices.
Figure 3-5 9362 Card Edge Status Indicators and Display
9362
4-Character Alphanumeric Display
RM
T
REF ERR 1
080
72
0
62
5
52
5
Output
Format
Indicators
Status/Error
Indicators
Item Function
Alphanumeric
Display Displays 4-digit alphanumeric code indicating status or errors as follows:
• E0XX: Video Errors
RMT LED Blue LED flashes when 9362 is receiving control message from remote network control (e.g., DashBoard™
or Cobalt
® Remote Control Panel)
REF LED Blue LED illuminates indicating 9362 is receiving valid reference when set up for framesync operation.
ERR LED Red LED illuminates when 9362 unable to lock to framesync, or unable to lock to input standard.
Output
Format LEDs Four blue LEDs indicate the selected signal raster format set for the TSG output (1080, 720, 625, 525).