Cobalt Digital COMPASS 9362 HD_SD-SDI Test Signal Generator - Manual (Page 44)

3
9362 Function Submenu List and Descriptions
3-18 9362 PRODUCT MANUAL 9362-OM (V4.1)
(continued)
• Download Presets Download Presets allows all 16 presets to be stored to a specified location
on a network computer for use with other same-model COMPASS™
cards.
Refer to Cobalt ® reference guide “Remote Control User Guide” (PN
9000RCS-RM) for instructions on using the Download Presets function.
Table 3-2 9362 Function Submenu List — continued
Download (save) card presets to a
network computer by clicking
Download
Presets – Save
at the bottom of
the Presets
page.
Browse to a desired
save location (in
this example, My
Documents\Cobalt
Presets).
The file can then be
renamed if desired
(RCVR21 Presets
in this example)
before saving.
Upload (open) card presets from a network
computer by clicking Upload
at the bottom of
DashBoard.
Browse to the location
where the file was saved
on the computer or
drive (in this example,
My Documents\Cobalt
Presets).
Select the desired file
and click Open to load
the file to the card.
To upload presets
saved from one card
to another same-model card, simply click Upload on the
other same-model card’s DashBoard page and repeat the
same steps here.
Note: • Preset transfer between card download and file
upload is on a group basis (i.e., individual presets
cannot be downloaded or uploaded separately).
• After uploading a presets file, engagement of a
desired preset is only assured by pressing the Preset
Load button for a desired preset.
Download a presets file to a computer on the card’s DashBoard network to save presets. Preset files stored on a computer can
then be uploaded back to the card.
Note also that a presets file can also be uploaded to other same-model COMPASS ® cards. In this manner, presets built up
using a single card can be easily applied to other same-model cards without repeating the setup work on the other cards.