Peerless Lighting OR3M1 - LED User Manual
Origami, Indirect, Suspended
LAMPING OPTIONS
S P E C I F I C A T I O N S
2246 5th Street, Berkeley, CA 94710
•
Tel: 510.845.2760
•
Fax: 510.845.2776
•
•
CATALOG NUMBER
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
SPECIFICATIONS
OR3M1
3
3
⁄
8
”
5
1
⁄
2
”
Type:
________________________
Project:
______________________
1
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms locat
Indirect
OR3M1 Origami LED
Suspended
OR3M1
Construction
Formed aluminum housing creates a 5
1
⁄
2
” x 3
3
⁄
8
”
body. Formed aluminum end caps are mechanically
attached with no exposed fasteners.
Source
Two LED lumen packages (2100 lumens, 4100
lumens) and three available color temperature
options (3000K, 3500K and 4000K).
Optics
Optical system consists of injection-molded primary
optic and painted metal reflector.
Finish
Aluminum paint housing with gloss white end
caps OR gloss white, red or black housings with
aluminum paint end caps and joiners. Consult
factory for custom color requirements.
Controls
Optional nLight-embedded controls allow for
constant lumen management (N80) and facilitate
simple “plug-and-play” networking and control via
CAT-5e cable.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimming driver rated for 50,000 hours
(L
80
) at 25° C ambient temperature. Specify 120V
or 277V. Pre-wired with 16AWG fixture wire. For
special circuiting or wire gauge, consult factory.
Plug-in electrical connectors included.
Environment
Damp location label optional. Ambient operating
temperature between 0° C and 25° C.
Luminaire Length
4’ and 8’ nominal luminaire sections. Add 1” for
each end cap to determine total luminaire length.
Using joiners, 4’ and 8’ sections can be joined to
form longer rows.
Validation
CSA/CUS listed. Individual sections are FCC part 15
certified. LM-79 tested. Lighting Facts partner.
Warranty
Five-year warranty coverage includes luminaire
construction, LED light engine, driver and optional
nLight control device. Terms and conditions apply.
Eco-friendly Packaging
100% post-consumer recycled cardboard box,
100% recycled cardboard cradles and kraft paper
tape. Biodegradable, protective luminaire bag.
Examples:
OR3M1 41L 40FT R8 277 D60 SCT F1/24 C301 N80
__________
__________
_________
__________
__________ __________
__________
__________
__________
Luminaire
OR3M1
Light Output
21L
2100 nominal
delivered-lumens
41L
4100 nominal
delivered-lumens
Luminaire
Row Length
X FT
(4’ increments)
Maximum
Section Length
R4
4’ section(s)
R8
8’ section(s)
Voltage
120
277
Driver
D30 30W maximum
(2100L package)
D60 60W maximum
(4100L package)
# of Emergency
Modules
(Blank) None
1SE
1 section
2SE
2 sections
XSE
X sections
Emergency Type
1
(Blank) None
EC
Emergency circuit
Switching
SCT
Single circuit
______________
______________
______________
______________
_________________________________
LED Color Temperature
LP830 3000K 80+ CRI 19+ R9
LP835 3500K 80+ CRI 20+ R9
LP840 4000K 80+ CRI 19+ R9
Mounting Type /
F1/
T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/
Hard ceiling (horizontal
J-box)
Overall Suspension
2
24 24”
36 36”
48 48”
72 72”
XX XX”
Overall suspension is
measured from ceiling to
bottom of luminaire.
Finish
C032 White white (high
gloss)
C110 Painted aluminum
(low gloss)
C301 Black (gloss)
C302 Red (gloss)
C099 Custom finish
Options
BLK
Black cord, cord manager and canopy
CP
Chicago plenum (available with F1A only)
DL
Damp location label
ELH
3
Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM
80% lumen management without networking
MCS Matching feed canopy at support
N80 nLight-enabled control module per row/zone with 80% constant lumen
management
N100 nLight-enabled control module per row/zone with NO lumen management
OJB
Offset junction box
SLP
Sloped ceiling (for 10-45°, must be specified with F2 and OJB options)
XXXX Integrated sensor; choose options and obtain code on page 2
Notes:
1 Emergency type is installed in last 4’ of luminaire sections.
Separate feed required unless ELS or ELS2 is specified
2 Adjustable cable grippers come standard
3 No dimming control on emergency feed
Origami
LED
Indirect