Peerless Lighting MN91x1 Sur - LED User Manual
Peerless mino, Direct – surface/wall – 1’ x 1, X 13
AVAILABLE LUMINAIRES
CATALOG NUMBER
S P E C I F I C A T I O N S
__________ __________ __________ __________ __________ __________ __________ _____________________
PHOTOMETRICS
2246 5th Street, Berkeley, CA 94710
•
Tel: 510.845.2760
•
Fax: 510.845.2776
•
•
SPECIFICATIONS
90
270
90
270
90
270
LP830
90 - lumens per watt
912 - delivered lumens
100% down
LP835
91 - lumens per watt
916 - delivered lumens
100% down
LP840
96 - lumens per watt
1002 - delivered lumens
100% down
Type:
________________________
Project:
______________________
Actual performance may differ as a result of end-user environment and application.
1
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms locat
Direct – Surface/Wall – 1’ x 1’
MN9 Peerless Mino LED
13
7
⁄
8
” x 13
7
⁄
8
” x 3
7
⁄
8
”
MN9
Peerless Mino
LED
Direct – Surface/Wall – 1’ x 1’
________
________
________
________
________
________
________
________
Luminaire
MN9
Dimension
1X1
Mounting Type
S
1
Surface
Voltage
MVOLT 120V-277V
347 347V
Driver Type
D10 10W
maximum
LED Color Temperature
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP840 4000K 80+ CRI
Finish
C311 Painted aluminum
C312 White (satin)
C099 Custom finish
Options
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM
80% lumen management
without networking
Construction
Extruded aluminum with mitered corners
forms housing.
Source
Three LED color temperatre options —
3000K, 3500K or 4000K — both within
2.5 MacAdam ellipses.
Lens
1
⁄
4
“ acrylic, high-performance Softshine
®
lens
fastened with thumb screws.
Finish
Painted aluminum is standard. Custom colors
available, consult factory.
Mounting
Powder-coated steel mounting pan is attached
to aluminum housing for secure and simplified
installation.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimmable driver (to 5%) rated for
50,000 hours (L
80
) at 25°C ambient temperature.
Specify MVOLT for 120V-277V or 347V with
transformer. Pre-wired with 16AWG fixture wire.
For special circuiting or wire gauge, consult factory.
Validation
CSA/CUS listed. FCC part 15 certified.
LM-79 tested. Lighting Facts partner.
Warranty
Five-year warranty includes luminaire construction,
LED light engine and driver. Terms and conditions
apply.
Eco-friendly Packaging
100% post-consumer recycled box. 100%
recycled cardboard inserts and kraft paper tape.
Biodegradable, protective luminaire bag.
Example:
MN9 1X1 S MVOLT D10 LP835 C311 LM
12 LBS
Notes:
1 For use on hard-surface ceiling and walls only
3
7
⁄
8
”
13
7
⁄
8
”
MN9 1X1 S