Peerless Lighting OR3W1 - LED User Manual
Origami wall, Indirect, Wall mount
LAMPING OPTIONS
S P E C I F I C A T I O N S
2246 5th Street, Berkeley, CA 94710
•
Tel: 510.845.2760
•
Fax: 510.845.2776
•
•
CATALOG NUMBER
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
SPECIFICATIONS
OR3W1
3
1
⁄
4
”
2”
4”
2
3
⁄
4
”
2”x4” switch box
by others
Type:
________________________
Project:
______________________
1
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms locat
Indirect
OR3W1 Origami Wall LED
Origami Wall
LED
Indirect
Construction
Formed aluminum housing creates a 5
1
⁄
2
” x 3
3
⁄
8
”
body. Formed aluminum end caps are mechanically
attached with no exposed fasteners.
Source
Two LED lumen packages (1800 lumens, 3500
lumens) and three available color temperature
options (3000K, 3500K and 4000K).
Optics
Optical system consists of injection-molded primary
optic and painted metal reflectors.
Finish
Aluminum paint housing with gloss white end
caps OR gloss white, red or black housings with
aluminum paint end caps and joiners. Arms and wall
canopy always match housing. Consult factory for
custom color requirements.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimming driver rated for 50,000 hours
(L
80
) at 25° C ambient temperature. Specify 120V
or 277V. Pre-wired with 16AWG fixture wire. For
special circuiting or wire gauge, consult factory.
Plug-in electrical connectors included.
Environment
Damp location label optional. Ambient operating
temperature between 0° C and 25° C.
Luminaire Length
4’ and 8’ nominal luminaire sections. Add 1” for
each end cap to determine total luminaire length.
Using joiners, 4’ and 8’ sections can be joined to
form longer rows.
Validation
CSA/CUS listed. Individual sections are FCC part 15
certified. LM-79 tested. Lighting Facts partner.
Warranty
Five-year warranty coverage includes luminaire
construction, LED light engine and driver. Terms
and conditions apply.
Eco-friendly Packaging
100% post-consumer recycled cardboard box,
100% recycled cardboard cradles and kraft paper
tape. Biodegradable, protective luminaire bag.
Examples:
OR3W1 35L 24FT R8 120 D60 SCT LP835 C110 LM
Wall Mount
OR3W1
__________
__________
_________
__________
__________
__________
__________
__________
Luminaire
OR3W1
Light Output
18L
1800 nominal delivered-lumens
35L
3500 nominal delivered-lumens
Luminaire
Row Length
X FT
(4’ increments)
Maximum
Section Length
R4
4’ section(s)
R8
8’ section(s)
Voltage
120
277
Driver
D30 30W maximum (1800L package)
D60 60W maximum (3500L package)
# of Emergency
Modules
(Blank) None
1SE
1 section
2SE
2 sections
XSE
X sections
Emergency Type
1
(Blank) None
EC
Emergency circuit
______________
________________
______________
_________________________________
Switching
SCT
Single circuit
LED Color Temperature
LP830 3000K 80+ CRI 19+ R9
LP835 3500K 80+ CRI 20+ R9
LP840 4000K 80+ CRI 20+ R9
Finish
C032 White white (high gloss)
C110 Painted aluminum (low gloss)
C301 Black (gloss)
C302 Red (gloss)
C099 Custom finish
Options
DL
Damp location label
ELH
2
Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM
80% lumen management without networking
Notes:
1 Emergency type is installed in last 4’ of luminaire sections.
Separate feed required unless ELS or ELS2 is specified
2 No dimming control on emergency feed
5
1
⁄
2
”
3
3
⁄
8
”
7
1
⁄
8
”