Peerless Lighting RDM1 - LED User Manual
Round 2, Indirect, Suspended
DIMENSIONS
SPECIFICATIONS
S P E C I F I C A T I O N S
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
2246 5th Street, Berkeley, CA 94710
•
Tel: 510.845.2760
•
Fax: 510.845.2776
•
•
CATALOG NUMBER
2
3
⁄
4
”
Type:
________________________
Project:
______________________
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
5-year limited warranty. Complete warranty terms locat
LED Indirect
RDM1 Round 2
1
Construction
Extruded aluminum housing has diameter of 2
3
⁄
4
”.
Die-cast aluminum end caps mechanically attach
with no exposed fasteners.
Source
Two LED lumen packages (2000 lumens, 4000
lumens) and three available color temperature
options (3000K, 3500K and 4000K).
Optics
Optical system consists of injection-molded
primary optic, clear and white co-extruded acrylic
lens and metal reflector.
Finish
Standard finish for housing and end caps is painted
aluminum or gloss white. Consult factory for
custom colors.
Controls
Optional nLight-embedded controls allow for
constant lumen management (N80) and facilitate
simple “plug-and-play” networking and control via
CAT-5e cable.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimming driver rated 50,000 hours
(L
80
) at 25° C ambient temperature. Driver input
wattage is 30W for 2000 delivered-lumen package
and 60W for 4000 delivered-lumen package per
4’ section.
Specify 120V or 277V. Pre-wired with 16AWG
fixture wire. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included.
Environment
Damp location label option. Ambient operating
temperature O° C to 25° C.
Luminaire Length
4’ and 8’ lengths in a single section for exact
suspension spacing of 4’ and 8’. For total luminaire
length, add 2” for each end cap. Using internal
joiners, 4’ and 8’ sections can be joined to form
longer rows.
Validation
CSA/CUS listed. Individual sections are FCC part
15 certified. LM-79 tested. Lighting Facts partner.
Warranty
Five-year limited warranty coverage includes
luminaire construction, LED light engine, driver and
nLight control device. Terms and conditions apply.
Packaging
100% post-consumer recycled cardboard box.
Biodegradable foam inserts and protective luminaire
bag. Recycled kraft paper tape.
Suspended
RDM1
Round 2
LED
Indirect
Examples:
RDM1 40L 40FT R8 277 D60 ISE EC SCT LP835 F1/24 C310 N80 PDT1 — RDM1 20L 40FT R8 120 D30 SCT LP835 F1/18 C311
RDM1
__________
__________
_________
__________
__________ __________
__________
__________
__________
Luminaire
RDM1
Light Output
20L
2000 nominal
delivered-
lumens
40L
4000 nominal
delivered-
lumens
Luminaire
Row Length
X FT
(4’ increments)
Maximum
Section
Length
R4
4’ section(s)
R8
8’ section(s)
Voltage
120
277
Ballast Type
D30 30W maximum
(2000L package)
D60 60W maximum
(4000L package)
# of Emergency
Modules
(Blank) None
1SE
1 section
2SE
2 sections
XSE
X sections
Emergency Type
1
(Blank) None
EC
Emergency circuit
Switching
SCT
Single circuit
______________
______________
______________
______________
_________________________________
LED Color Temperature
LP830 3000K 80+ CRI 18+ R9
LP835 3500K 80+ CRI 20+ R9
LP840 4000K 80+ CRI 20+ R9
Mounting Type /
F1/
T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/
Hard ceiling (horizontal
J-box)
Overall Suspension
2
24 24”
36 36”
48 48”
72 72”
XX XX”
Overall suspension is measured
from ceiling to bottom of luminaire
Finish
C310 Gloss white
C311 Painted aluminum
C099 Custom finish
Options
BLK
Black cord, cord manager and canopy
CP
Chicago plenum (available with F1A only)
DL
Damp location label
ELH
3
Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM
80% lumen management without networking
MCS Matching feed canopy at support
N80 nLight-enabled control module per row/zone with 80% constant lumen
management
N100 nLight-enabled control module per row/zone with NO lumen management
OJB
Offset junction box
SLP
Sloped ceiling (for 10-45°, must be specified with F2 and OJB options)
XXXX Integrated sensor; choose options and obtain code on page 2
Notes:
1 Emergency type is installed in last 4’ of
luminaire sections. Separate feed required
2 Adjustable cable gripper comes standard
3 No dimming control on emergency feed