Daystar KJ09127BK User Manual
Page 4
4.
With the track bar disconnected install the track bar drop down bracket
(S10921) and mark the hole in the axle bracket that need to be drilled.
5.
Using a drill, drill the 5/16 hole in the axle brake and install the bolt,
washer and nut.using the stock bolt, install it in the stock location.(
1
)
1
19.
With the shackles installed, install the rear lift shocks( not supplied)
and install the rear tires.
20.
Lower the Jeep off the jack stands and put the weight of the Jeep on
the ground.
21.
Tighten the shackle bolt to 50 ft pounds. Do not over tighten the bolt
and nuts.
22.
With all four tire and wheels on the ground check the lug nuts.
Torque to factory spec.
See also other documents in the category Daystar For the car:
- KJ09112BK (1 page)
- KJ09113BK-1 (1 page)
- KJ61004BK (1 page)
- KF09112BK (2 pages)
- KA09100BK (6 pages)
- KC09102BK (1 page)
- KJ60003 (1 page)
- KJ04503BK (1 page)
- KJ71043BK (4 pages)
- KT09118BK (1 page)
- KC09122-2 (2 pages)
- KF09102 (1 page)
- KJ60005 (1 page)
- KJ61003 (1 page)
- KT09120BK (4 pages)
- KT09110BK (2 pages)
- KN09107 (2 pages)
- KJ09152BK (1 page)
- KJ02001 (1 page)
- KJ09156BK-2 (4 pages)
- KJ61009BK (1 page)
- KCO9106 (8 pages)
- KG09108 (4 pages)
- KF09108 (4 pages)
- KJ71034TN (8 pages)
- KJ09117BK-2 (1 page)
- KJ61002 (1 page)
- KU70038BK-1 (4 pages)
- KJ61017 (1 page)
- KT09103BK (1 page)
- KJ61005BK (1 page)
- KC09107 (1 page)
- KJ09155BK-2 (4 pages)
- KU70035BK-2 (4 pages)
- KC09121 (2 pages)
- KT09105BK (1 page)
- KJ09153CAMO (6 pages)
- KG09109 (4 pages)
- KU70037BK-1 (4 pages)
- KJ61019BK (1 page)
- KJ09103CAMO (2 pages)
- KJ09123BK-1 (2 pages)
- KF09050 (2 pages)
- KT09116BK (3 pages)
- KT09115-1 (3 pages)