Daystar KU70038BK-1 - Manual

TOOLS NEEDED
• Press or vice ( Daystar tool KU70091)
• Retaining clip pliers
• Floor jack
• Jack stand (s) 4
• Wheel chock
• Grease ( poly lube gun KU11005)
• 3/4 drive ratchet
• 10” 3/4 extension
• 13/16 wrench and 13/16 socket
• 7/18 wrench and 7/8 socket
• Measuring tap
• 21mm wrench and 21mm socket
BILL OF MATERIALS
Part # Description Qty
S11097 Control arm lower 2
S11100 Rod end 2
BU70037 Hardware kit 1
M00492 Bushing 4
M00494 Bushing 4
S11085 Steel Ball 4
S10617 C-clip 8
S10135 Washer 8
S10212 9/16 Bolt 4
S10205 9/16 Nuts 4
S10818 1-14 Jam nut 2
P10027 Grease 1
P11183 Thread lock 1
Jeep JK Products
• KJ09138 3/4” Front & rear lift
• KJ09137 1 3/4” Front & rear lift
• KU09059 EVS Foam bump-stops
• KU09060 EVS Foam bump-stops
• KU70034 Ft lower control arms
• KU70033 Rear upper control arms
• KU70037 Rear lower control arms
• KU70091 poly flex tool
• KU11005 Poly lube gun
KU70037
2007 to Current Jeep JK control arm kit
www.Daystaproducts.com
Tech Support Contact Info
[email protected]
Phone: 623.907.0081
Fax: 623.907.0088
841 South 71 st Avenue
Instruction Sheet P11239
2007 Daystar Products International Inc.
Hells gate, Moab UT