Snap-On DTT - Manual (Page 5)

• Never attempt to test an impact tool or pulse type
tool on this instrument.
• Mount the DTT securely to a heavy bench, wall or
other support structure before applying torque.
• Do not use the DTT if it makes unusual noises,
has loose parts, or shows any other sign of
damage. Have repairs performed at an Authorized
Service Center before use.
• Do not use chipped, cracked, or damaged sockets
and accessories.
• Do not remove any labels. Replace any damaged
label.
AC Adapter Safety
Risk of electric shock and fire.
• Do not allow conductive objects to come in
contact with terminals. 120 or 220 volts present at
adapter terminals.
• For indoor use only. Do not expose adapter to
rain or snow. Do not use in damp locations.
• Replace defective cord immediately. Return to
qualified service center for replacement.
• Do not use any other type of adapter. Using an
adapter not specifically designed for this unit may
damage tester.
• Do not use an extension cord with adapter.
• Do not use a damaged adapter.
• Do not disassemble adapter.
• Do not attempt to connect two adapters together.
• Do not operate adapter with damaged cord or
plug. Replace immediately.
• Do not operate adapter after it is dropped,
receives a sharp blow or damaged. Take the
adapter to an Authorized Service Center.
• Unplug adapter from outlet before maintenance or
cleaning. Turning off tester is not adequate to
avoid hazard.
• Read all instructions and safety messages on
battery and adapter before use.
Electric shock or fire can cause injury.
SAVE THESE INSTRUCTIONS
3
WARNING
DTT Digital Torque Tester