Snap-On DTT User Manual

Page 19

DTT Digital Torque Tester

6b. Press the CHANGE button next to WRENCH SIZE to

enter the Full Scale torque and Units of the wrench

being calibrated (Figure 14).

NOTE: If the incorrect value is entered, press BS to

clear the last digit entered, or press CLEAR to

delete the entire entry.

Press UNITS to scroll between FT-LB, IN-LB,

IN-OZ, KG-CM, Nm and cNm units.

Press NEXT to accept the entry and return to the

TEST SETUP screen.

NOTE: For information on how to update

SERIAL NUM, and

OPERATOR ID;

please refer to Steps 5c & 5d.

Press TEST to accept all entries.

ENTER WRENCH MAX RANGE :

MAIN

CLEAR

UNITS

Figure 14: Wrench Max Range screen

FT-LB

250