Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 - Manual (Page 45)

45 Pneg-1413 4-Leg Towers
OFFSET PLATFORM
ASSEMBLY (CONT.)
STC00189-A
(Rest Platform
Short Frame)
STC00204
(38-1/2" Top
Handrail)
STC00198
(Handrail
Post)
S-456
(3/8" Hex
Nuts) S-8671
(3/8" x 1"
HHCS Bolts)
STC00198
(Handrail
Posts)
STC00205
(38-1/2" Top
Handrail)
STC00206
(38-1/2" Top
Handrail)
STC00201
(5' Top
Handrail)
STC00202
(5' Mid Bar)
STC00190
(Rest Platform
Plank)
S-456
(3/8" Hex
Nuts)
S-8671
(3/8" x 1"
HHCS Bolts)
S-6497
(1/4" x 3/4"
Self Drilling
Screws)
FIG. OP10
FIG. OP11
FIG. OP12
13. Attach (2) 38-1/2" Top Handrails (STC00204),
(2) 38-1/2" Mid Bars (STC00205), and (1)
38-1/2" Kicker Plate (STC00206) to the
Handrail Posts (STC00198) using (12) 3/8" x
1" HHCS bolts and nuts as shown in Fig.
OP10.
14. Attach the 5' Top Handrail (STC00201) and 5'
Mid Bar (STC00202) to the Handrail Posts
(STC00198) using (4) 3/8" x 1" HHCS bolts
and nuts as shown in Fig. OP11.
15. Attach the Rest Platform Plank (STC00190)
to the Rest Platform Short Frames
(STC00189 & STC00189-A) using
(8) 1/4" x 3/4" self drilling screws (S-6497).
Make sure to offset screws from any existing
holes. (See Fig. OP12)
STC00189
(Rest Platform
Short Frame)