Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 - Manual (Page 41)

41 Pneg-1413 4-Leg Towers
OFFSET PLATFORM
ASSEMBLY
STC00185
(H-Brace
Replace with
STC00186)
S-3729
(1/2" Hex
Nuts)
S-7534
(1/2" x 1-1/4"
HHCS Bolts)
STC00186
(“H” Brace Rest
Platform)
STC00188
(Rest Platform
Long Frame)
S-7534
(1/2" x 1-1/4"
HHCS Bolts)
STC00198
(Handrail Posts)
S-456
(3/8" Hex
Nuts)
S-8671
(3/8" x 1"
HHCS Bolts)
STC00188
(Rest Platform
Long Frame)
STC00198
(Handrail
Posts)
S-8671
(3/8" x 1"
HHCS Bolts)
STC00201
(5' Top Handrail)
STC00202
(5' Mid Bar)
S-456
(3/8" Hex
Nuts)
1. Follow the ladder layouts on page 22 for your
ladder package. Starting from the top of tower
and working down, should give you the proper
location for the Rest Platform Long Frame
(STC00188) and the Rest Platform "H" Brace
(STC00186).
2. Attach the Rest Platform Long Frame
(STC00188) to the H-Brace (STC00185).
Then replace the H-Brace (STC00185) that is
below the offset platform with the Rest Plat-
form “H”-Brace (STC00186). Use (4) 1/2" x
1-1/4" bolts & nuts (See Fig. OP1)
3. Attach Handrail Posts (STC00198) to the
Rest Platform Long Frame (STC00188)
using (2) 3/8" x 1" bolts & nuts. (See Fig
OP2)
4. Attach the 5' Top Handrail (STC00201) and
the 5' Mid Bar (STC00202) to the Handrail
Posts (STC00198) using (4) 3/8" x 1" HHCS
bolts & nuts. (See Fig. OP3)
FIG. OP1
FIG. OP2
FIG. OP3