Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 - Manual (Page 17)

17 Pneg-1413 4-Leg Towers
4-LEG TOWER 5' MID SECTION ASSEMBLY
STC00185
(H-Braces)
STC00183
(Vertical X-Braces)
S-3729
(1/2" Hex Nuts)
STC00181
(Column Splice Plates)
STC00226
(Internal X-
Braces)
S-7534
(1/2" x 1-1/4"
HHCS Bolts)
S-3729
(1/2" Hex
Nuts) S-3728
(1/2" x 1-1/2"
HHCS Bolts)
STC00337
(5' Columns)
S-3728
(1/2" x 1-1/2"
HHCS Bolts)
1. Attach Vertical X-Braces (STC00183) to the 5'
Columns (STC00337) as shown in Fig. 4 using
1/2" hardware provided.
2. Attach the column splice plates (STC00181) to
the tops of the 5' Columns (STC00337), using
(2) 1/2" x 1-1/2" HHCS bolts (S-3729) and nuts
(S-3728) for each plate. (See Fig. 4)
3. Repeat steps 1-2 for the opposite side, so you
have two identical sections.
SIDE 1 & SIDE 2 ASSEMBLY SIDE 3 & SIDE 4 ASSEMBLY
1. Connect the first two sections together by
attaching the Vertical X-Braces (STC00183) and
H-Braces (STC00185) as shown in Fig. 4, using
the 1/2" hardware provided.
2. Attach the Internal X-Braces (STC00226) to the
H-Braces (STC00185) as shown in Fig. 4, using
the 1/2" hardware provided (S-7534 & S-3729).
FIG. 4