Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 User Manual
Page 27
27
Pneg-1413 4-Leg Towers
OPTIONAL SERVICE
PLATFORM WITH
SAFETY CAGE
ASSEMBLY (CONT.)
STC00193
(Service
Platform Clips)
STC00192
(Service Platform
Short Frame)
S-456
(3/8" Hex
Nuts)
S-8671
(3/8" x 1"
HHCS Bolts)
STC00191
(Service Platform
Long Frame)
S-456
(3/8" Hex
Nuts)
S-8671
(3/8" x 1"
HHCS Bolts)
STC00191
(Service Platform
Long Frame)
STC00193
(Service
Platform Clip)
STC00193
(Service
Platform Clips)
STC00194
(9' x 12" Platform Planks)
S-456
(3/8" Hex
Nuts)
S-8671
(3/8" x 1"
HHCS Bolts)
STC00191
(Service
Platform Long
Frame)
4.
Attach (4) Service Platform Clips
(STC00193) to the ends of the Service
Platform Long Frames (STC00191) using
(2) 3/8" x 1" HHCS bolts & nuts for each
clip as shown in Fig. SP4.
5.
Attach Service Platform Short Frame
(STC00192) to the Service Platform Clips
(STC00193) on the ends of the Service
Platform Long Frames (STC00191) using
(2) 3/8" x 1" HHCS bolts & nuts for each
clip as shown in Fig. SP5.
NOTE: Field cope flanges of platform
planks near STC00191 (Service Platform
Long Frame), to avoid handrail post clips &
bolts.
6.
Attach (8) Service Platform Clips
(STC00193) to the Service Platform Long
Frame (STC00191) using (8) 3/8" x 1"
HHCS bolts & nuts as shown in Fig. SP6.
7.
Attach 9' x 12' Platform Planks
(STC00194) to the Service Platform Short
Frames (STC00192) using (4) 3/8" x 1"
HHCS bolts for each plank as shown in
Fig. SP6.
STC00192
(Service Platform
Short Frame)
FIG. SP4
FIG. SP5
FIG. SP6